AERO MAX Electric Motors can be widely used as driving equipments of various machineries, such as machine tools, blowers, pumps, compressors, transporters, agricultural and food processing. Pedastal installation size and centre height and other index of the motor completely measured.
The motor are adopted with F class insulation and designed with assessing method for insulation system according to international practice, it enhances greatly have reached an international advanced level of the same kind of products at the initial days of the 90’s.
General specification :
- IP 55 as minimum – higher rating are available on request
- Cooling method IC411
- Standard Motor are rated for continous duty at full nameplate rating -S1
- There motors are designed for operation in high ambient temperature of 40°C or more. The standards data relates to ambient up to 40°C and attitudes below 1000 meters
- Standard motors are have class F (100°C) insulation, with a class B (80°C) temperature rise. Only high quality polyester covered copper winding wire is used in conjunction with inorganic high temperature polyester vanish. motor with class H (125°C) insulation are available on request.
- Stator and rotor laminations are produced from low loss double insulated and silicon electrical steel
- All motor are designated for high efficiency and low temperature rise giving a long economical service life
- High Quality bearings are used on AeroMax electric motor. in general the bearings have C3 clearances and are preloaded with a wave washer on the drive and which increases bearing life and reduces bearing noise
- Standard noise levels (sound pressure at 1 meter) are well within the requirements of most standards, and are generally below 80dB (A) for small motors and 85 dB (A) for large motors
- Shafts are made from high quality carbon steel.
- Stator frame are made of HT200 cast cast iron
- Fans are made from glass reinforced polypropylene for small motors up to 280 frame size
